Filter
Top Products
9
GB
Name Function
H SP A/SP B/
SP A+B
Lights up according to the
speaker system used (page 32).
However, these indicators do
not light up if the speaker output
is turned off or if headphones
are connected.
I SLEEP Lights up when the sleep timer
is activated (page 90).
J A.DIRECT Lights up when the receiver is
processing Analog Direct
signals.
K Tuning
indicators
MEM
MONO
RDS
ST
Lights up when the receiver
tunes in radio stations.
Lights up when a memory
function, such as Preset
Memory (page 68), etc., is
activated.
Monaural broadcast
A station that provides RDS
services is tuned in.
Note
“RDS” appears for models of
area code CEL, CEK only.
Stereo broadcast
L S-AIR Lights up when the S-AIR
transmitter (not supplied) is
connected.
M Dolby
Pro Logic
indicators
PL
PL II
PL IIx
Lights up one of the respective
indicators when the receiver
applies Dolby Pro Logic
processing to 2 channel signals
in order to output the center and
surround channel signals.
Dolby Pro Logic
Dolby Pro Logic II
Dolby Pro Logic IIx
Note
These indicators do not light up
when either the center speaker
and surround speaker is not
connected.
N BI-AMP Lights up when surround back
speakers selection is set to
“BI-AMP” (page 91).
O EQ Lights up when the equalizer is
activated.
P NEO:6 Lights up when DTS Neo:6
Cinema/Music decoder is
activated (page 62).
Name Function
Q DTS-HD
indicators
DTS-HD
MSTR
DTS-HD HI
RES
Lights up one of the respective
indicators when the receiver is
decoding the corresponding
DTS-HD format signals.
DTS-HD Master Audio
DTS-HD High Resolution
Audio
R LPCM Lights up when Linear PCM
signals are detected.
S DMPORT Lights up when DIGITAL
MEDIA PORT adapter is
connected and “DMPORT” is
selected.
T HDMI Lights up when the receiver
recognizes a component
connected via an HDMI IN jack
(page 24).
U Playback
channel
indicators
L
R
C
SL
SR
S
SBL
SBR
SB
The letters (L, C, R, etc.)
indicate the channels being
played back. The boxes around
the letters vary to show how the
receiver downmixes or upmixes
the source sound (based on the
speaker settings).
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Surround Back Left
Surround Back Right
Surround Back (the surround
back components obtained by
6.1 channel decoding)
Example:
Speaker pattern: 3/0.1
Recording format: 3/2.1
Sound Field: A.F.D. AUTO