Filter
Top Products
85
GB
Other Operations
Switching between
digital and analog audio
(INPUT MODE)
When you connect components to both digital
and analog input jacks on the receiver, you can
fix the audio input mode to either of them, or
switch from one to the other, depending on the
type of material you intend to watch.
1 Turn INPUT SELECTOR on the
receiver to select the input.
You can also use the input buttons on the
remote.
2 Press INPUT MODE repeatedly
on the receiver to select the
audio input mode.
The selected audio input mode appears on
the display.
Audio input modes
x AUTO
Gives priority to digital audio signals when
there are both digital and analog connections.
If there are no digital audio signals, analog
audio signals are selected.
x ANALOG
Specifies the analog audio signals input to the
AUDIO IN (L/R) jacks.
Notes
•Some audio input modes may not be set up
depending on the input.
• When the ANALOG DIRECT function is selected,
audio input is set to “ANALOG” automatically and
you cannot select other modes.
•When HDMI 1–4 or DMPORT input is selected,
“------” appears on the display, and you cannot
select other modes. Select an input mode other than
the HDMI 1–4 and DMPORT input, then set the
audio input mode.
Enjoying the sound/
images from other inputs
You can reassign audio and/or video signals to
another input when they are not currently
being used.
For example, connect the OPTICAL OUT jack
of the DVD player to the OPTICAL BD IN
jack of this receiver when you want to input
the digital optical audio signals from the DVD
player.
Connect the component video jack of the DVD
player to the COMPONENT VIDEO IN 1 jack
of this receiver when you want to input the
video signals from the DVD player.
Assign audio and/or video signals to the DVD
input jack using “A. ASSIGN” and/or “V.
ASSIGN” in the AUDIO and/or VIDEO menu
respectively.
1 Press AMP MENU.
2 Press V/v repeatedly to select
“AUDIO” or “VIDEO”.
3 Press or b to enter the
menu.
4 Press V/v repeatedly to select
“A. ASSIGN” or “V. ASSIGN”.
5 Press or b to enter the
parameter.
6 Press V/v repeatedly to select
the input name you want to
assign (for example, “DVD”).
7 Press or b to enter your
selection.
Other Operations
continued