Filter
Top Products
26
GB
The following illustration shows how to
connect a DVD player.
It is not necessary to connect all the cords.
Connect audio and video cords according to
the jacks of your components.
Notes
• Be sure to change the factory setting of the DVD
input button on the remote so that you can use the
button to control your DVD player. For details, see
“Programming the remote” (page 95).
• You can also rename the DVD input so that it can
be displayed on the receiver’s display. For details,
see “Naming inputs” (page 41).
• The initial setting of the COMPONENT VIDEO
IN 2 jacks are DVD player. If you want to connect
your DVD player to the COMPONENT VIDEO IN
1 or IN 3 jacks, set “V. ASSIGN” in the VIDEO
menu (page 56).
•When connecting optical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
• To input multi channel digital audio from the DVD
player, set the digital audio output setting on the
DVD player. Refer to the operating instructions
supplied with the DVD player.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
* When you connect a component equipped with an
OPTICAL jack, set “A. ASSIGN” in the AUDIO
menu (page 55).
Connecting a DVD player
DC5V
0.7A MAX
ANTENNA
DMPORT
AM
VIDEO 1
IN
TV
AUDIO
IN
VIDEO
IN
SAT
AUDIO
OUT
AUDIO
OUT
VIDEO
OUT
VIDEO
OUT
IN
OPTICAL
AUDIO
IN
VIDEO
IN
SUBWOOFER
MONITOR
AUDIO
IN
VIDEO
IN
BD
LR
LR
LR
SPEAKERS
CENTER
SURROUND
FRONT A
SURROUND BACK/
BI-AMP/
FRONT B
TV
EZW-T100
R
SA-CD/CD/CD-R
OUT
IN
L
HDMI
IN 4
ASSIGNABLE (INPUT ONLY)
(for AUDIO)
IN 2
IN 3
IN 1 OUT
SAT
IN
BD
IN
OPTICAL
COAXIAL
IN 3
Y
P
B
/
C
B
P
R
/
C
R
COMPONENT VIDEO
ASSIGNABLE (INPUT ONLY)
DVD
IN
IN 2
IN 1
MONITOR
OUT
DIGITAL
(ASSIGNABLE)
DVD player
AC
AComponent video cord (not supplied)
BOptical digital cord (not supplied)
CCoaxial digital cord (not supplied)
Video signals Audio signals
B