Filter
Top Products
57
GB
Amplifier Operations
x SW LEVEL (Subwoofer level for
HDMI)
Lets you set the level of the subwoofer to 0 dB
or +10 dB when PCM signals are input via an
HDMI connection. You can set the level for
each HDMI input independently.
•SW AUTO
Automatically sets the level to 0 dB or +10
dB depending on the frequency.
•SW 0 dB
• SW +10 dB
Note
This parameter is only available when HDMI input
signals are detected.
Settings for the system
(SYSTEM menu)
You can use the SYSTEM menu to name
inputs and change the brightness of the
display.
Select “SYSTEM” in the amplifier menus. For
details on adjusting the parameters, see
“Navigating through menus” (page 44) and
“Overview of the menus” (page 45).
SYSTEM menu parameters
x NAME IN (Naming inputs)
Lets you set the name of inputs. For details,
see “Naming inputs” (page 41).
x DIMMER (Brightness of the
display)
Lets you adjust the brightness in 3 steps.