Filter
Top Products
14
GB
Name Function
TUNING +/– Press to scan a station.
D.TUNING Press to enter direct tuning
mode.
N TV CH +
a)
/– Press TV (C) and then
press TV CH +/– to select
preset TV channels.
PRESET
+
a)
/–
Press to
–select preset stations.
–select preset channels of
the VCR, satellite tuner,
Blu-ray disc player, DVD
player, DVD/VHS
COMBO, or DVD/HDD
COMBO.
O F1, F2 Press F1 or F2 to select a
component.
• DVD/HDD COMBO
F1: HDD mode
F2: DVD mode
• DVD/VHS COMBO
F1: DVD mode
F2: VHS mode
P BD/DVD TOP
MENU
Press to display the menu or
on-screen guide of the DVD
or Blu-ray disc on the TV
screen. Then, use V/v/B/b
and to perform menu
operations.
BD/DVD MENU Press to display the menu of
the DVD or Blu-ray disc on
the TV screen. Then, use
V/v/B/b and to perform
menu operations.
TV INPUT Press TV (C) and then
press TV INPUT to select
the input signal (TV input or
video input).
WIDE Press TV (C) and then
press WIDE to select the
wide picture mode.
Q TV VOL +/– Press TV (C) and then
press TV VOL +/– to adjust
the TV volume level.
MASTER
VOL +/–
Press to adjust the volume
level of all speakers at the
same time.
Name Function
R MUTING Press to turn off the sound
temporarily. Press MUTING
again to restore the sound.
Press TV (C) and then press
MUTING to activate the TV’s
muting function.
S DISC SKIP Press to skip disc of the CD
player, VCD player, DVD
player, or MD deck (multi-
disc changer only).
T RETURN/
EXIT O
Press to
– return to the previous menu.
– exit the menu while the
menu or on-screen guide of
the VCD player, LD player,
DVD player, Blu-ray disc
player, PSX, DVD/VHS
COMBO, or satellite tuner
is displayed on the TV
screen.
To return to the previous
menu of Sony TV, press TV
(3) and then press
RETURN/EXIT O.
U DISPLAY Press to select information
displayed on the display
window or TV screen of the
VCR, VCD player, LD player,
DVD player, CD player, MD
deck, Blu-ray disc player,
PSX, satellite tuner, DVD/
VHS COMBO, or DVD/HDD
COMBO.
To select information of Sony
TV, press TV (C) and then
press DISPLAY.
V INPUT MODE Press AMP (4), then press
INPUT MODE to select the
input mode when the same
components are connected to
both digital and analog jacks
(page 85).
W AUTO CAL Press to activate the Digital
Cinema Auto Calibration
function.
X 2CH/
A.DIRECT
Press to select sound field or
to switch the audio of the
selected input to analog signal
without any adjustment (page
65).