Filter
Top Products
48
EN
Additional Information
FM tuner section
Tuning range 87.5 - 108.0 MHz
Antenna terminals
75 ohms, unbalanced
Sensitivity Mono: 18.3 dBf,
2.2 µV/75 ohms
Stereo: 38.3 dBf,
22.5 µV/75 ohms
Usable sensitivity
11.2 dBf,
1 µV/75 ohms (IHF)
S/N Mono: 76 dB
Stereo: 70 dB
Harmonic distortion at 1 kHz
Mono: 0.3%
Stereo: 0.5%
Separation 45 dB at 1 kHz
Frequency response
30 Hz - 15 kHz
+0.5/–2 dB
Selectivity 60 dB at 400 kHz
AM tuner section
Tuning range With 10-kHz tuning
scale:
530 - 1610 kHz
d)
With 9-kHz tuning
scale:
531 - 1602 kHz
d)
Antenna Loop antenna
Usable sensitivity
50 dB/m (at 1,000 kHz
or 999 kHz)
S/N 54 dB (at 50 mV/m)
Harmonic distortion
0.5 % (50 mV/m,
400 Hz)
Selectivity At 9 kHz: 35 dB
At 10 kHz: 40 dB
d) You can change the AM tuning scale to 10
kHz. After tuning in any AM station, turn
off the receiver. Hold down the TUNING +
button and press the 1/u button. All preset
stations will be erased when you change the
tuning scale. To reset the scale to 9 kHz,
repeat the procedure.
Video section
Inputs 1 Vp-p 75 ohms
Outputs 1 Vp-p 75 ohms
General
System Tuner section:
PLL quartz-locked
digital synthesizer
system
Preamplifier section:
Low-noise NF type
equalizer
Power amplifier
section:
Pure-complementary
SEPP
Power requirements
120/220/240 V AC
selectable, 50/60 Hz
Power consumption
310 W
AC outlets 2 switched, total 100 W
Dimensions 430 × 370 × 157.5 mm
(17 × 14
5
/8 × 6
1
/4
inches) including
projecting parts and
controls
Mass (Approx.)
10.5 kg (23 lb 3 oz)
Supplied accessories
See page 4.
Design and specifications are subject
to change without notice.
Specifications