Filter
Top Products
Editing Recorded MDs
34
GB
Naming Tracks or MDs
You can enter a name for a recorded MD as well as for
individual tracks. Names can consist of uppercase and
lowercase letters, numbers, and symbols. A total number
of 1,700 characters can be stored for all the names on the
MD.
MENU/NO
m/M
./>
NAME
CLEAR
CHAR
YES
. >
m M
z x
X
H
Z
` / 1
+
–
+
–
Note
If you name a track while it is being recorded, be sure to finish
the naming operation before the track ends. If the track ends
before you finish, the entered character data will be discarded
and the track will remain unnamed. Also, you can’t name tracks
while the deck is recording over existing material.
Naming a track or MD
1 Press NAME while the deck is in one of the
operating statuses below, depending on what you
want to name.
To name a track
Press while the deck is playing, paused, recording, or
stopped with the track number displayed.
To name the MD
Press while the deck is stopped with no track number
displayed.
A flashing cursor appears in the display.
2 Press CHAR repeatedly to select the character type.
To select Press repeatedly until
Uppercase letters “Selected ABC” appears in the
display
Lowercase letters “Selected abc” appears in the
display
Numbers or symbols* “Selected 123” appears in the
display
* The following symbols can be selected:
! ” # $ % & ’ ( ) * + , – . / : ; < = > ? @ _ `
A
3 Enter a character.
If you’ve selected uppercase or lowercase letters
1 Press the corresponding letter/number button
repeatedly until the character to be entered flashes.
Or, press the button once and press ./>
repeatedly.
D
To change a selected character
Repeat step 2.
2 Press M.
The flashing character is entered and lights
continuously and the cursor shifts to the right.
D
If you’ve selected numbers
Press the corresponding number button.
The number is entered and the cursor shifts to the
right.
Letter/number
buttons