Filter
Top Products
11
GB
Location of Parts and Brief Explanations
Using the Display
The display window shows information about the MD or
track. This section describes the information that appears
for each deck status.
SCROLL
DISPLAY
. >
m M
z x
X
H
Z
` / 1
+
–
+
–
Note
The type of information (e.g., total number of tracks, recorded
time, remaining time, track or disc name) which was last
displayed will continue to appear until you change it by pressing
DISPLAY, even if you change the deck operation status. For
example, if the remaining time was displayed when you stop the
deck, the remaining time will continue to appear when you begin
playing the same MD again or a different one.
When you insert an MD
The display automatically changes as follows:
15 46m 08s
SONGS
While the deck is stopped
Press DISPLAY repeatedly to change the display.
Each press of the button changes the display as follows:
15 46m 08s
-27m 52s
SONGS
*
Not shown for the premastered discs.
**
When the MD has no name, “No Name” appears, followed by the
default display.
While the deck is recording
Press DISPLAY repeatedly to change the display.
Each press of the button changes the display as follows:
16 3m 05s
-24m 47s
BALLAD
*
When the track has no name, “No Name” appears, followed by the
default display.
Total number of tracks Total recorded time
Disc name
Total number of tracks and total
recorded time (default display)
Press
Remaining recordable time on the
MD (recordable MDs only)*
Press
Disc name**
Press
Track number and recorded time of
the current track (default display)
Press
Remaining recordable time on the
MD
Press
Level of the input signal
Press
Track name*
Press