Filter
Top Products
24
You can record from CD, tape, or radio as
you like. For example, you can record just the
songs you want or record from the middle of
the tape. The recording level is adjusted
automatically.
1 Insert a recordable tape into deck B.
2 Press one of the function buttons
you want to record (e.g., CD).
3 Press REC PAUSE/START.
Deck B stands by for recording. · (for
front side) lights up.
–
+
0
g
)
≠ +
–
+
1
2
3
4
5
§
§ §
·
ª · π ª · π
∏
π
DOLBY NR
ª
π
Recording on a tape
manually
The Tape Deck
4 Press DIRECTION repeatedly to
select A to record on one side.
Select ß (or RELAY) to record on
both sides.
5 Press REC PAUSE/START.
Recording starts.
6 Start playing the source to be
recorded.
To Press
Stop recording π on the deck B
Pause recording REC PAUSE/START
Tips
•If you want to record from the reverse side, press
ª so that ª (for reverse side) lights up.
•When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
that “DOLBY NR” lights up after pressing
REC PAUSE/START in step 3.
•When recording from a CD, you can use the jog
dial to select tracks during recording pause mode
(after pressing REC PAUSE/START in step 3 and
before pressing again in step 5).
Note
Dolby NR is off and DIRECTION (A or RELAY) is
ß when the mains AC power supply is switched
off.
1
2
3,5
4
1/u
(power)