Filter
Top Products
Basic Operations
19
1 Press § and insert a recorded tape
in deck A and a recordable tape in
deck B.
2 Press HI DUB.
Deck B stands by for recording.
3 Press DIRECTION repeatedly to
select A to record on one side.
Select ß (or RELAY) to record on
both sides.
4 Press REC PAUSE/START.
Dubbing starts.
To stop dubbing
Press π on deck A or B.
Tips
•When you dub on both sides, start recording from
the front side. If you record from the reverse side,
recording stops at the end of the reverse side.
•If you set DIRECTION to ß when the tapes you
use have different lengths, the tape in each deck
reverses independently. If you select RELAY, the
tapes on both decks reverse together.
•You don’t have to set DOLBY NR, since the tape in
deck B is automatically recorded in the same state
as the tape in deck A.
•Dolby NR is off and DIRECTION (A or RELAY)
is ß when the mains AC power supply is
switched off.
Recording from a
tape
— High-speed Dubbing
With the side
you want to
play/record
facing forward
You can use TYPE I (normal) or TYPE II
(CrO2) tapes. The recording level is
automatically adjusted.
–
+
0
g
)
≠ +
–
+
1
2
3
4
5
§
§ §
·
ª · π ª · π
∏
π
DOLBY NR
π
π
1/u
(Power)
11324
§