Filter
Top Products
Basic Operations
13
1
2
3
4
5
§
§ §
·
ª · π ª · π
∏
π
DOLBY NR
π
ª
The CD SYNC button lets you record from a
CD to a tape easily. You can use TYPE I
(normal) or TYPE II (CrO2) tapes. The
recording level is adjusted automatically.
1 Press § and insert a recordable tape
into deck B.
continued
Recording a CD
— CD Synchro Recording
With the side
you want to
record facing
forward
To Do this
Stop play
Pause
Select a track
Find a point in
a track
Select a CD
in stop mode
Play only the
CD you have
selected
Play all CDs
Remove the CD
Change other
CDs while
playing a CD
Adjust the
volume
Tips
•Pressing · when the power is off automatically
turns the power on and starts CD playback if there
is a CD in the tray (One Touch Play). When the
system is in the Power Saving Mode, the One
Touch Play function does not work.
•You can switch from another source to the CD
player and start playing a CD just by pressing ·
or the DISC 1~5 buttons (Automatic Source
Selection).
•If there is no CD in the player, “CD NO DISC”
appears in the display.
•When a disc tray holding a CD is selected (or
playing), the DISC 1~5 button for that tray lights
green.
Note
Do not use force to close the disc tray, as this may
cause CD player trouble. Always close the tray by
pressing the appropriate CD 1~5 §.
1
2
5
4
3
§
Press π (p on the remote).
Press ∏ (P on the remote).
Press again to resume play.
During play or pause, turn the
jog dial clockwise (to go
forward) or counterclockwise
(to go back) and release it when
you reach the desired track. (Or
press + (to go forward) or
= (to go back) on the
remote.)
Press and hold down ) or
0 (or )/0 on the
remote) during play and release
it at the desired point.
Press a DISC 1~5 button (or D.
SKIP on the remote).
Press PLAY MODE repeatedly
until “1 DISC” appears.
Press PLAY MODE repeatedly
until “ALL DISCS” appears.
Press one of the CD 1~5 §
buttons.
Press one of the CD 1~5 §
buttons to open the tray that
contains the CD that you want
to change. When you change
the CD, press the same button
to close the tray. While the tray
is open, the DISC 1~5 button
indicator for that tray flashes
orange.
Turn VOLUME (or press
VOLUME +/– on the remote).