Filter
Top Products
Sound mode settings
Mode (underlined:
default setting)
Explanation
V-SUR Studio Recreates the sound
of a recording studio
Live Recreates the sound
of a concert hall
Club Recreates the sound
of a dance hall
Arena Recreates the sound
of a stadium
SOUND Heavy Dignified sound
Pops Light and soft sound
Jazz Emphasis on the
bass tone
Unique Emphasis on both the
high and bass tones
Custom1 Up to two kinds of
desired sound can be
stored
Custom2
To customize the sound – Custom
You can store two sound settings that are
finely adjusted in all six sound ranges.
1
Select “Custom1” or “Custom2” in step
3 of “Selecting the sound mode
– V-SUR/SOUND” on page 26, and
press the jog lever. One “-”, which
shows the sound level, flashes.
2
Slide the jog lever left or right to make
the range you want to adjust flash. The
six “-”s show the sound range of 100Hz,
250Hz, 630Hz, 1.6kHz, 4kHz, or 10kHz
from the left.
3
Turn the volume control toward +/– to
adjust the sound volume of the selected
range in a maximum of seven
increments.
The center is 0dB. Each turn toward –
increases the volume to +3dB, +6dB,
and +10dB in order, and each turn
toward + moves it to –3dB, –6dB, and –
10dB in order.
4
Repeat steps 2 and 3 to adjust the
volume for each range.
5
After adjusting, press the jog lever.
The sound setting you selected is stored
as “Custom1” or “Custom2.” Once you
have stored the sound setting, it will
remain until a new one is stored.
26
27
Playback