Filter
Top Products
MD information on the display
Track number/Elapsed time
Track number/Track name
The number of total tracks in the group
/Group name
1)
The number of total tracks/Disc name
Track number/Group name (upper line)
/Track name (lower line)
2)
Track number/Sound mode
Track number/Recording mode
(SP2/LP2/LP4/MONO)
3)
To check the MD information
Press the DISPLAY button repeatedly to check
the MD information on the remote display. If
the information, such as the track name, is
longer than the display, the letters scroll from
right to left.
When “Power Mode” is set to “Power Save”
(page 31), the information is displayed only
for several seconds by pressing the DISPLAY
button.
1)
The display appears only for an MD with group
settings.
2)
The track name appears on the upper line for an MD
with no group setting.
3)
The display appears only during playback and
changes automatically to the display of the track
number and the elapsed time after a while.
Playing an MD (continued)
Locking the controls – HOLD
In order to prevent accidental button presses
while carrying the player, you can lock the
controls (HOLD) for the remote and the
player separately.
For example, you can operate the player by
using the remote even if the HOLD function
on the player is activated.
To lock the controls on the player
1
Open the lid following the steps in
“To open the lid” (page 18).
2
Slide the HOLD switch, located inside
on left side of the player toward .
The controls on the player are disabled.
HOLD switch
To unlock the controls, slide the HOLD
switch in the opposite direction of .
To lock the controls on the remote
Slide the HOLD switch on the remote toward
, so that yellow shows on the right end.
The controls on the remote are disabled.
HOLD switch
To unlock the controls, slide the HOLD
switch in the opposite direction of
.
20
21
Playback