Sony Q017-MD1 CD Player User Manual


 
Charging the battery (continued)
Checking the battery’s remaining
power
The battery life of the built-in rechargeable
battery varies depending on the recording
mode of the MD. For details on battery life,
refer to the following table.
Approximate playing time of the lithium-ion
built-in rechargeable battery*
(JEITA**) (when the battery is fully charged)
SP mode LP2 mode LP4 mode
21 hours 27 hours 33 hours
* Approximate time when “Power Mode” is set to
“Power Save” (page 31).
** Measured in accordance with the JEITA (Japan
Electronics and Information Technology Industries
Association) standard (using a Sony MDW-series
Mini-disc).
Check the operation lamp on the player or
(battery) on the remote display to see
how much battery power is left. Recharge
the battery when the level of remaining
power is low.
Display of the remaining power*
Operation
lamp
Remote
display
Remaining
power
Lights up There is
sufficient battery
power.
Lights up The number of
black sections
decreases as the
power is used.
Flashes
slowly
Lights
up
The power is
low.
Flashes
quickly
Flashes The power is
almost gone.
Turns off Flashes There is no
power left.
“LOW BATT”
flashes in the
display, and the
power turns off.
* Press the DISPLAY button on the remote when
“Power Mode” is set to “Power Save” (page 31).
(battery) is displayed for several seconds.
Notes
(battery) may not be displayed correctly while
you are fast-forwarding or fast-reversing.
• The battery life may vary even under the same
recording mode or the same (battery) display,
depending on the charging time, the operating
conditions, or the room temperature.
16
17
Getting Started