Filter
Top Products
63-GB
Playback sound
skips.
• The recorder is placed where it receives continuous vibration.
, Put the recorder on a stable place.
• A very short track may cause sound to skip.
Sound has a lot of
static.
• Strong magnetism from a television or such device is interfering
with operation.
, Move the recorder away from the source of strong magnetism.
Cannot find the
track marks.
• You pressed X after pressing . or >.
, Press X before flipping the jog lever or pressing . or >.
The rechargeable
battery does not
start charging.
• The rechargeable battery has been inserted incorrectly or the AC
power adaptor has been connected incorrectly.
, Insert the battery correctly or connect the AC power adaptor
correctly.
The clock loses
time or the display
flashes.
The recording date
was not stamped
onto the disc.
• The built-in battery for the clock is weak.
, Connect the AC power adaptor to DC IN 3V on the recorder
and the wall outlet to charge the built-in battery. After
charging, set the clock again (page 30). Note that the clock
may gain or lose up to about 2 minutes per month under normal
condition.
• The clock is not set.
, Set the clock (page 30).
CD text
information cannot
be recorded.
• The cable connecting the devices is not an optical cable.
, Use an optical cable to connect the devices.
• The connected portable CD player does not supports CD-TEXT.
, Connect a portable CD player (D-E990, etc.) that supports CD-
TEXT (page 31).
• The inserted CD does not support CD-TEXT.
, Insert a CD that supports CD-TEXT.
VOL +/– or
Digital Sound
Preset does not
function
• The “ AUDIO OUT” parameter is set to “ LINE OUT” .
, Set the “ AUDIO OUT” parameter to “ HeadPhone” (page 20).
The disc cannot
edit on other
component.
• The component does not support LP2 or LP4.
, Edit on other component that support LP2 or LP4.
Momentary noise
is heard.
• Due to the special digital audio compression technology used in
LP4 mode, momentary noise may occur on very rare occasions
with certain sound sources.
, Record in normal stereo or LP2 mode.
Symptom Cause/Solution