Filter
Top Products
53-GB
Other operation
Setting the alarm
(Melody Timer)
You can set the alarm to go off in 1 to 99
minutes.
On the recorder
1 While the recorder is stopped,
playing, or play-paused, press the jog
lever (L).
2 Flip the jog lever (L) until “ M-
TIMER” flashes in the display, and
press the lever.
3 Flip the jog lever (L) until “ ON”
flashes in the display, and then press
the lever.
, lights up in the display.
4 Flip the jog lever (L) repeatedly to
select the elapsed time.
One rotation of the control changes
the elapsed time setting (TIME :) by 1
minute, within a range of 1 to 99
minutes. To change the time quickly,
flip and hold the jog lever (L).
5 Press the jog lever (L).
The time is set.
6 Flip the jog lever (L) to select the
alarm sound.
The following sounds can be selected.
7 Press the jog lever (L).
Melody timer is set.
The time remaining until the alarm is
shown in the display while the
recorder is stopped or play-paused.
To show the remaining time during
play, do steps 1 to 3.
To cancel setting the alarm
Press x.
On the remote control
1 While the recorder is stopped,
playing, or play-paused, press
DISPLAY for 2 seconds or more.
2 Turn the control towards . or
towards N> until “ M-TIMER”
flashes in the display, and then press
x.
Jog lever (L)
TIME:01
Display Alarm sound
MELODY : 1 Classical music 1
MELODY : 2 Classical music 2
MELODY : 3 Beeps
MELODY:2
DISPLAY
Control
x
continued