Filter
Top Products
52-GB
Searching by the first letter of a
phrase
1 When labeling a track or disc, pull
and turn the control towards VOL +
or towards VOL – to move the cursor
to the letter which the desired phrase
begins with.
2 Press X to search.
The phrase for that letter appears in
the display. If there are two or more
phrases that start with that letter, press
X to see the next phrase.
3 Press x while the phrase you want is
shown in the display.
The cursor flashes after the phrase
you just retrieved. You can then
continue with labeling operation.
Erasing phrases
You can erase phrases from the phrase
bank while the recorder is stopped. You
can also erase phrases when the recorder
is empty.
1 Press DISPLAY for 2 seconds or
more.
2 Turn the control towards . or
towards N> until “ EDIT” flashes
in the display, and press x.
3 Turn the control towards . or
towards N> repeatedly until
“ BankErase” appears in the display,
and then press x.
4 Turn the control towards . or
towards N> repeatedly until the
phrase you want to erase appears, and
then press x.
“ Erase!” appears in the display and
the phrase is erased.
If there is no phrase stored in the
phrase bank, “ EMPTY” appears in
the display.
To cancel the operation, press
DISPLAY for 2 seconds or more.