Filter
Top Products
40-GB
Checking the remaining
time or the playing
position
You can check the track name, disc name,
etc. during playback.
On the recorder
1 While the recorder is playing, press
the jog lever (L), flip the lever until
“ DISPLAY” flashes in the display,
and then press the lever again.
2 Flip the jog lever (L) until the
information you want flashes in the
display.
Each time you flip the lever, the
display changes as follows.
LapTime (The elapsed time.)
r
1 Remain (The remaining time of
the current track.)
r
AllRemain (The remaining time
after the current location.)
r
RecDate (Recording date and
time.)
3 Press the jog lever (L).
The display changes as follows.
Display window on the recorder
z
The display that appears on the remote control
is different from the ones on the recorder. See
“ On the remote control” (page 41) to check the
display that appears on the remote control.
Jog lever (L)
AB
Track number Elapsed time
Track number
1)
1)
If the track is labeled, “” appears in the
display followed by the track name.
Remaining time of
the current track
Number of tracks
after the current
track
2)
2)
If the disc is labeled, “” appears in the
display followed by the disc name.
Remaining time
after the current
location.
Recorded date
3)
3)
Appears only when the clock is set.
Recorded time
3)
A B