Filter
Top Products
36-GB
Display window on the remote control
Indication (Play mode)
— (All the tracks are played once.)
r
1 (A single track is played.)
r
SHUF (After the currently
selected track finishes playing, the
remaining tracks are played in
random order)
r
PGM (Tracks are played in the
order that you specified.)
Creating a Program (Program
play)
1 While the recorder is stopped, playing
or play-paused, press PLAYMODE
repeatedly until “ PGM ” flashes in
the display.
2 Turn the control towards . or
towards N> to select a track.
3 Press RPT/ENT to enter a track
number.
4 Repeat Step 2 and 3 to program more
tracks.
5 Press RPT/ENT for 2 seconds or
more.
z
• The program play setting will be remain in
memory even after playback finished or is
stopped.
• You can set the program play up to 20 tracks.
Notes
• All program settings are lost when the disc is
removed from the recorder.
• If you stop creating a program for 5 minutes
while the recorder is stopped, the program that
was made up to that point is entered.
Repeat play
Press RPT/ENT on the remote control during
playback.
“” appears in the display.
z
The settings can be stored to the Personal Disc
Memory (page 38).
To adjust the sound
quality (Digital Sound
Preset)
You can make adjustments to the sound
quality to suit your taste, and then store
two sets of these adustments.
1 Press SOUND repeatedly to select
“ SOUND1” or “ SOUND2” .
Play mode indication
Track
number
Program number
RPT/ENT
SOUND
Control