Filter
Top Products
– 7 –
)
)
)
)
@
@
^
6 Remove the ornamental belt assy
in the direction of arrow C.
2 Open toward the direction B
to disengage two bosses
and convex portions pointed
with
*.
1 Pull toward the direction A
to disengage two bosses .
Note: As the ornamental belt assy
is very fragile, do not give an
excessive force to the entire
assy when removing it.
C
B
A
A
B
3 three bosses
4 knob (open)
2 Open toward the direction B
to disengage two bosses
and convex portions pointed
with
*.
boss
boss
boss
boss
5 two bosses
BELT ASSY, ORNAMENTAL
MAIN BOARD, “CASE ASSY, BATTERY”
3 four toothed lock screws
(M1.4)
2 flexible board (over write head)
(CN601)
2 flexible board (LCD module)
(CN801)
Note: Before removing the flexible board
from CN501, be sure to solder the
flexible board.
(Refer to servicing notes (NOTES ON
HANDLING THE OPTICAL PICK-UP
BLOCK (LCX-2R)) page 3.)
1 Remove the solder of
battery terminal (minus).
1 Remove the solder of joint.
8 batter case assy
7 four bosses
2 motor flexible board
(CN602)
5 flexible board
(optical pick-up)
(CN501)
1 Remove the solder of
battery terminal (plus).
6 main board
4