Filter
Top Products
– 5 –
PANEL ASSY, BOTTOM
Note: Follow the disassembly procedure in the numerical order given.
SECTION 3
DISASSEMBLY
• This set can be disassembled in the order shown below.
Upper Panel Section
Main Board, “Case Assy, Battery”
LCD Module, “Button, Control”, “Service Assy, Upper Panel” (R90/R91)
Main Board, “Case Assy, Battery”
“Chassis Assy, Set”,
MD Mechanism Deck (MT-MZR90-165)
Panel Assy, Bottom
Set
Belt Assy, Ornamental
Service Assy, OP
Motor Flexible Board
Motor, DC (Sled) (M602)
“Motor, DC SSM-01C14A (Spindle) (M601)”, “Motor, DC (Over Write Head Up/Down) (M603)”
Holder Assy
4 two screws
(1.4)
1 flexible boar
d
(CN801)
5 upper panel section
4 two screws
(1.4)
2 knob (open)
3
UPPER PANEL SECTION
Note: On installation of bottom
panel assy, adjust the posi-
tion of both two switches
(S804, S807) and two
knobs (hold).
S807
S804
4 Close the
battery terminal (plus).
5 two screws
(1.4)
1 Open the
battery case lid.
3 battery case li
d
6 Remove the bottom panel assy
in the direction of arrow A.
A
5 two screws
(1.4)
knob (hold)
5 screw (1.4)
2 two claws