Filter
Top Products
18
If the play does not start
Make sure the recorder is not locked (page 12,
44).
Suppressing the skips of the sound
(G-PROTECTION)
The G-PROTECTION function was developed
to provide a higher level of shock resistance
than that of existing players.
Note
The playback sound may skip if:
• the recorder receives stronger continuous
shock.
• a dirty or scratched MiniDisc is played.
z
• The playback mode will switch automatically
(stereo, LP2 stereo, LP4 stereo, or monaural).
• To play only the tracks in a certain group, see
“Using the group function (Group Mode)”
(page 29).
To Operation on the recorder
Find the beginning of the current track or a
previous track
1)
1)
If you press . twice continuously while playing the first track of the disc, the recorder goes to the
beginning of the last track on the disc.
Press ..
Press . repeatedly until the beginning of
the desired track.
Find the beginning of the next track
2)
2)
If you press > during the last track of the disc, the recorder goes to the beginning of the first track
on the disc.
Press > once.
Go backwards while playing Press and hold ..
Go forward while playing Press and hold >.
Pause Press X.
Press X again to resume play.
Remove the MD Press x, and open the lid.
3)
3)
Once you open the lid, the point to start play will change to the beginning of the first track.