Filter
Top Products
– 20 –
Pin No. Pin name I/O Pin Description
1 MNT 0 O Traverse count signal output.
2 MNT 1 O Track jump detect output.
3 MNT 2 — Not used (Open).
4 MNT 3 O Focus OK signal output.
5 SWDT I Inputs write data signal from system control (IC801).
6 SCLK I Inputs serial clock signal from system control (IC801).
7 XLAT I Inputs serial latch signal from system control (IC801).
8 SRDT O Outputs write data signal to system control (IC801).
9 SENS O Outputs internal status (SENS) to system control (IC801).
10 XRST I Inputs reset signal from system control (IC801). L : Reset
11 SQSY O
Output subcode Q sync (SCOR) to system control (IC801).
Outputs “L” every 13.3 msec. Outputs “H” at all most mostly.
12 DQSY O
Outputs digital-in U-bit CD format subcode Q sync (SCOR) to system control (IC801).
Outputs “L” every 13.3 msec. Outputs “H” at all most mostly.
13 WRPWR I Inputs laser power switching signal from system control (IC801).
14 NC — Not used (Open).
15 TX I
Input of write data taransmission timing from system control (IC801).
Also used as magnetic field head ON/OFF output.
16 OSC1 O Clock output (22.5 MHz).
17 OSC0 I Clock input (22.5 MHz).
18 XTSL — Not used (Fixed at “L”)
19 NC — Not used (Connect to ground).
20 RVSS — Connect to ground.
21 DIN I Digital audio signal input pin (For optical input).
22 NC — Not used (Open).
23 ADDT I Audio data input from A/D converter (IC301).
24 DATA O Monitor/decode audio data output to A/D converter (IC301).
25 ALRCK O L/R clock output to D/A converter (IC301).
26 ABCK O Bit clock signal output to A/D, D/A converter (IC301).
27 FS256 O 11.2896 MHz clock output (MCLK).
28 DVDD — Power supply (+2.8 V) for digital.
29 – 39 A00 – A08, A10, A11 O Address signal output to DRAM (IC602).
40 DVSS — Ground terminal.
41 XOE O Output enable contol signal output to DRAM (IC602).
42 XCAS O Column address strobe singal output to DRAM (IC602).
43 A09 O Address signal output to DRAM (IC602).
44 XRAS O Row address strobe signal output to DRAM (IC602).
45 XWE O Read/write control signal output to DRAM (IC602).
46 – 49 D0 – D3 I Data signal input from DRAM (IC602).
50 MVCI — Not used (Connect to ground).
51 ASYO O Playback EFM full-swing output (L : VSS, H : VDD).
52 ASYI I Playback EFM asymmetry comparate voltage input.
53 AVDD — Power supply (+2.8 V) for analog.
54 BIAS I Playback EFM asymmetry circuit constant current input.
55 RFI I Inputs playback EFM RF signal from RF amplifier (IC501).
SECTION 6
DIAGRAMS
6-1. IC PIN DESCRIPTIONS
• IC601 CXD2652AR (DIGITAL SERVO, ENC/DEC & ATRAC MEMORY CONTROLLER)