Filter
Top Products
Editing Recorded MDs
36
EN
Labeling tracks and MDs with the remote
Z
Alphabet/number
buttons
r
6
)0
+=
pP·
NAME
CHAR
CLEAR
NUM
0/)
1 Press NAME so that a flashing cursor appears in
the display, then do the following:
To label Make sure that the player is
A track Playing, pausing, recording the track
to be labeled, or stopped after locating
the track to be labeled
An MD Stopped with no track number
appearing in the display
2 Select the character type as follows:
To select Press
Uppercase letters CHAR repeatedly until “Selected
ABC” appears in the display
Lowercase letters CHAR repeatedly until “Selected
abc” appears in the display
Numbers NUM repeatedly until “Selected
123” appears in the display
3 Enter one character at a time.
After you enter a character, the cursor shifts
rightwards and waits for the input of the next
character.
4 Repeat steps 2 and 3 until you have entered the
entire title.
If you entered the wrong character
Press 0 or ) until the character to be corrected
starts flashing.
Press CLEAR to erase the incorrect character, then enter
the correct one.
5 Press NAME again.
The entered title appears on the left side of the
display after the label has been recorded.
To cancel labeling
Press p.
Changing an existing title
1 Press NAME so that a track title or disc title
appears in the display, then do the following:
To change Make sure that the player is
A track title Playing, pausing the track whose title
is to be changed, or stopped after
locating the track whose title is to be
changed
A disc title Stopped with no track number
appearing in the display
2 Keep pressing CLEAR (or EDIT/NO on the unit)
until the current title is erased.
3 Enter the new title.
Do steps 3 to 5 of “Labeling Recordings” on page
35, or steps 2 to 4 of “Labeling tracks and MDs
with the remote” on this page.
4 Press NAME.
Erasing all titles on a disc (Name Erase)
Use this function to erase all titles on an MD
simultaneously.
Note that once erased, titles cannot be recovered.
1 Press EDIT/NO repeatedly while the player is
stopped until “All Erase ?” appears in the display.
2 Press EDIT/NO again.
“Name Erase ?” appears in the display.
3 Press YES.
All titles are erased.
To cancel the Name Erase function
Press p.
z You can erase all recorded tracks and titles
See “Erasing all tracks on an MD” on page 31.