Filter
Top Products
11
EN
Playing CDs
Locating a Specific Track on a
CD
You can quickly locate any track while playing a CD by
using AMS (Automatic Music Sensor), = and +,
number buttons or M.SCAN on the remote.
Press CD (or set CD/MD to CD) to switch the function
of the buttons to CD.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
≠ AMS ±
P
p·
§
0)
§
CD
≠ AMS ±
Number
buttons
CD/MD
Switch
r
6
)0
+=
pP·
M.SCAN
·
=/+
..>25
To locate Do the following:
The next or
succeeding tracks
The current or
preceding tracks
A specific track
directly Z
By scanning each
track (music scan) Z
z When you directly locate a track with a number over
25 Z
You must press >25 first, before entering the
corresponding digits.
To enter “0,” press button 10.
Example: To play track number 30
Press >25 once, then 3 and 10.
While playing, turn AMS clockwise
(or press + repeatedly) until you
find the track.
While playing, turn AMS
counterclockwise (or press =
repeatedly) until you find the track.
Press number buttons to enter the
track number.
1 Press M.SCAN before you start
playing.
2 When you find the track you want,
press · to start playing.
z You can extend the playing time during music scan
Z
While the player is stopped, press M.SCAN repeatedly
until the playing time you want (6, 10 or 20 seconds)
appears in the display. Each time you press the button,
the display changes as follows:
n M. SCAN 06s n M. SCAN 10s n M. SCAN 20s
(6 sec.) (10 sec.) (20 sec.)
z To pause playing at the beginning of a track
Turn AMS (or press = or +) after pausing playing.
z To go quickly to the beginning of the last track
Turn AMS counterclockwise (or press =) while the
display shows the total number of tracks and total
playing time of the disc.