Filter
Top Products
CMT-DH7BT.GB.3-097-195-11(2)
71
GB
Additional Information
Continued
The subtitles language cannot be
changed.
Multilingual subtitles are not recorded
on the DVD VIDEO being played
back.
e DVD VIDEO prohibits changing
the subtitles.
The subtitles cannot be turned o.
e DVD VIDEO prohibits turning o
subtitles.
The angles cannot be changed.
Multi-angles are not recorded on the
DVD VIDEO being played back.
e DVD VIDEO prohibits changing
the angles.
Tuner
The radio presetting is canceled.
e power cord is disconnected or a
power failure occurred for longer than
half a day. Redo “Listening to preset
radio station” (page 49).
There is severe hum or noise.
(“TUNED” or “ST” ashes in the
display)
Set the proper band and frequency
(page 48).
Connect the antenna properly
(page 14).
Find a place and an orientation that
provide good reception, then set up
the antenna again. If you cannot obtain
good reception, we recommend that
you connect a commercially available
external antenna.
Keep the antennas, SiriusConnect
Home tuner, and AC adaptor away
from the speaker cords and the power
cord to avoid picking up noise.
e supplied FM lead antenna receives
signals along its entire length, so make
sure you extend it fully.
Locate the antennas as far away from
the speaker cords as possible.
Try turning o the surrounding
electrical equipment.
A stereo FM program cannot be
received in stereo.
Press FM MODE
repeatedly until
“MONO” disappears from the display.
The system cannot receive satellite
channels at all.
Check that the XM Mini-Tuner and
Home Dock or the SiriusConnect
Home tuner are connected properly.
e receiving condition is not good.
Move to the place where the condition
is good.
Check that you subscribed to the
desired satellite radio service (pages 16
and 17).
Optional components
There is no sound.
Refer to General item “ere is no
sound.” (page 66) and check the
condition of the system.
Connect the component properly
(page 64) while checking:
if the cords are connected properly.
if the cord plugs are rmly inserted
all the way.
Turn on the connected component.
Refer to the operating instructions
supplied with the connected
component and start playing.