Filter
Top Products
CMT-DH7BT.GB.3-097-195-11(2)
48
GB
Tuner
Listening to the radio
You can listen to a radio station either by
selecting a preset station, or by manually
tuning in the station.
Listening to FM or AM
1
Press FUNCTION +/
repeatedly to select “TUNER FM”
or “TUNER AM” (or press TUNER/
BAND
on the unit repeatedly
to select “FM” or “AM”).
2
Press and hold TUNING +/
until the frequency indication
changes and then release.
Scanning stops automatically when
a station is tuned in and “TUNED”
lights up in the display. When a FM
stereo program is tuned in, “ST”
lights up in the display.
If “TUNED” does not appear and
the scanning does not stop, press
TUNING +/
repeatedly to tune
in the station you want.
3
Adjust the volume.
Press VOLUME +/
.
To stop automatic scanning
Press
.
To change the AM tuning interval
e factory setting for AM tuning
interval is 9 kHz (or 10 kHz for same
areas).
Use buttons on the unit.
1
Press TUNER/BAND
on the unit
repeatedly to select “AM”.
2
Press /
to turn o the system.
3
Press DISPLAY
to display the clock.
4
While the clock is displayed, hold
down TUNER/BAND
and then
press /
to turn on the system.
“AM 9k Step” or “AM 10k Step”
appears in the display.
When you change the interval, all the
AM preset stations are erased.
Tips
To improve broadcast reception, adjust the
supplied antennas, or connect an external
antenna.
When an FM stereo program has static
noise, press FM MODE
repeatedly until
“MONO” lights up in the display. ere will
be no stereo eect, but the reception will
improve.
Listening to satellite radio
You can operate and listen to XM or
SIRIUS satellite radio by connecting an
optional antenna or tuner. Before using
the system, connect the XM Mini-Tuner
and Home Dock or the SiriusConnect
Home tuner to the system. See “Hooking
up the system” (page 14) for details about
connection.
1
Select “XM” or “SIRIUS.”
Press XM or SIRIUS
(or TUNER/
BAND
repeatedly).