Filter
Top Products
37
Additional Information
Speaker
Front speaker SS-S9
Speaker system 3-way, 3-unit,
bass-reflex type,
magnetically shielded type
Speaker units
Woofer: 15 cm, cone type
Subwoofer: 15 cm, cone type
Tweeter: 2.8 cm, dome type
Nominal impedance 6 ohms
Dimensions (w/h/d)
Approx. 235 x 470 x 265 mm
Mass Approx. 7.3 kg net per
speaker
Rear speaker SS-RS270
Speaker system 1-way, 1-unit,
bass-reflex type
Speaker units
Full-range: 8 cm, cone type
Nominal impedance 8 ohms
Dimensions (w/h/d)
Approx. 180 x 95 x 100 mm
Mass Approx. 0.65 kg net per
speaker
Center speaker SS-CT270
Speaker system 1-way, 2-units,
bass-reflex type,
magnetically shielded type
Speaker units
Full-range: 8 cm, cone type
Nominal impedance 8 ohms
Dimensions (w/h/d)
Approx. 225 x 95 x 100 mm
Mass Approx. 1.2 kg net
General
Power requirements
European model: 230 V AC, 50/60 Hz
Australian model: 230 – 240 V AC,
50/60 Hz
Mexican model: 120 V AC, 60 Hz
Korean model: 220 V AC, 60 Hz
Other models: 120 V, 220 V or
230 – 240 V AC,
50/60 Hz
Adjustable with voltage
selector
Power consumption
European model: 300 watts
0.6 watts (during Power
Saving Mode)
Other models: 300 watts
Dimensions (w/h/d)
TA-S7AV:
Approx. 280 x 128 x 350 mm
ST-S5:
Approx. 280 x 108 x 340 mm
CDP-S3:
Approx. 280 x 108 x 330 mm
TC-S3:
Approx. 280 x 128 x 330 mm
Mass
TA-S7AV: Approx. 7.7 kg
ST-S5: Approx. 2.1 kg
CDP-S3: Approx. 2.7 kg
TC-S3: Approx. 2.4 kg
Supplied accessories: AM loop antenna (1)
FM lead antenna (1)
Remote commander (1)
Batteries (2)
Speaker cords (5)
Optical cable (1)
Center and rear speaker
pads (12)
Design and specifications are subject to change
without notice.