Filter
Top Products
18
Using the Radio Data
System (RDS)
(European model only)
What is the Radio Data
System?
Radio Data System (RDS) is a broadcasting
service that allows radio stations to send
additional information along with the regular
program signal. This tuner offers convenient
RDS features like station name display and
location of stations by program type. RDS is
available only for FM stations.
Note
RDS may not work properly if the station you are
tuned to is not transmitting the RDS signal properly
or if the signal is weak.
Receiving RDS broadcasts
Simply select a station from the FM band.
When you tune in a station that provides RDS
services, the station name appears in the
display.
To check the RDS information
Press DISPLAY.
Each time you press the button, the display
changes cyclically as follows:
Station name* t Frequency t Program
type* t Clock display t Effect status
* If the RDS broadcast is not received, the station
name and program type may not appear in the
display.
Locating a station by
program type (PTY)
You can locate a station you want by selecting
a program type. The tuner tunes in the type of
programs currently being broadcast from the
RDS stations stored in the tuner’s preset
memory.
The types of programs include NEWS,
AFFAIRS (current news), INFORMATION,
SPORT, EDUCATION (education programs),
DRAMA, CULTURE, SCIENCE, VARIED
(interviews, games and comedy), POP, ROCK,
EASY MUSIC, L.CLASSICAL,
S.CLASSICAL, OTHER MUSIC, WEATHER,
FINANCE, CHILDREN, SOCIAL,
RELIGION, PHONE IN, TRAVEL, LEISURE,
JAZZ, COUNTRY (country music), NATION
(nation’s popular music), OLDIES, FOLK,
DOCUMENTARY (investigative features),
ALARM TEST (test signal for emergency
broadcast), ALARM-ALARM (emergency
broadcast) and NONE (any programs not
defined above).
1 Press PTY while listening to the radio.
2 Press PRESET + or – repeatedly to
select the program type you want.
3 Press ENTER (Tuner or remote).
“SEARCH” and the selected program type
appear alternately in the display.
When the tuner receives a program, the
preset station name flashes.
4 Press PRESET + or – repeatedly to
continue searching for the station
name you want.
5 Press ENTER (Tuner or remote) while
the preset station name you want is
flashing.
To cancel the PTY search
Press PTY again.
Note
“NO PTY” appears when the program type you
selected is not currently being broadcast.