Filter
Top Products
8
US
Place the front speakers at an angle of 45
degrees from your listening position.
Use buttons on the remote for the operation.
1 Press ?/1 to turn on the system.
2 Press CLOCK/TIMER SET.
“CLOCK” appears in the display. Then, the
hour indication flashes in the display.
3 Press –. or >+ repeatedly to set
the hour.
4 Press ENTER.
The minute indication flashes in the
display.
5 Press –. or >+ repeatedly to set
the minute.
6 Press ENTER.
The clock starts functioning.
To adjust the clock
1 Press CLOCK/TIMER SET.
“SET” appears in the display, then “PLAY
SET?” flashes in the display.
2 Press –. or >+ repeatedly to select
“CLOCK SET?”, then press ENTER.
The hour indication flashes in the display.
3 Do the same procedures as step 3 to 6
above.
Notes
• The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
• You cannot set the clock in Power Saving Mode
(page 24).
Positioning the speakers
Front
speaker
(R)
Surround speaker
(L)
Surround speaker
(R)
Front
speaker
(L)
Unit
45°
Setting the clock