Sony MHC-LX10000 Home Theater System User Manual


 
12
US
3 Press one of DISC 1 ~ 3 buttons or
EX-CHANGE/DISC SKIP (or DISC SKIP
on the remote) to select a disc.
To program all the tracks on a disc at once,
proceed to step 5 while “AL” appears in the
display.
To program all the MP3 audio tracks on
an album at once, turn and hold
ALBUM +/– clockwise or
counterclockwise and release it at the
album you want (or press ALBUM +/– on
the remote repeatedly until the album you
want appears in the display), then proceed
to step 5.
4 Turn . > clockwise or
counterclockwise (or press –. or
>+
on the remote repeatedly) until
the track number you want appears in
the display.
The total playing time flashes in the display.
When programming an MP3 audio track,
turn and hold ALBUM +/– clockwise or
counterclockwise and release it at the album
you want (or press ALBUM +/– on the
remote repeatedly until the album you want
appears in the display), then turn .
>
clockwise or counterclockwise (or press
.
or >+ on the remote repeatedly)
until the track number you want appears in
the display.
5 Press ENTER.
The track(s) is(are) programmed.
The program step number appears in the
display.
6 To program additional discs or tracks.
7 Press nN (or N on the remote).
Program Play starts.
Other operations
Tips
The program you made remains in the system’s
memory even after it has been played back. Press
nN (or N on the remote) to play back the same
program again.
If “--.--” appears instead of the total playing time
during programming, this means:
– you have programmed a track number which
exceeds 20.
– the total playing time has exceeded 100 minutes.
– you have programmed an MP3 audio track.
Track
number
Total playing time
(including selected
track)
Disc tray
number
To program Repeat steps
Other discs 3 and 5
Other tracks on the
same disc
4 and 5
Other tracks on
other discs
3 to 5
To Do this
Cancel Program
Play
When playback is stopped, press
PLAY MODE on the remote
repeatedly until “PROGRAM”
disappear from the display.
Clear a track from
the end of program
Press CLEAR on the remote
when playback is stopped.