Sony MHC-LX10000 Home Theater System User Manual


 
Display
25
US
1 Press AMP MENU repeatedly to select
“SPECTRUM”.
The last selected spectrum setting appears
in the display.
2 Turn OPERATION DIAL clockwise or
counterclockwise to select the setting
you want.
The display changes as follows:
3 Press ENTER.
1 Press AMP MENU repeatedly to select
“DIMMER”.
The last selected dimmer setting appears in
the display.
2 Turn OPERATION DIAL clockwise or
counterclockwise to select the setting
you want.
The display changes as follows:
* DIMMER 2 is the darkest.
3 Press ENTER.
Press ILLUMINATION repeatedly to select
the power illuminator you want when the
system is turned on.
Each time you press the button, the power
illuminator changes cyclically as follows:
PATTERN 1 t PATTERN 2 t
PATTERN 3 t PATTERN 4 t
PATTERN OFF
Notes
When you turn MASTER VOLUME (or press
VOLUME +/– on the remote), power illuminator
shows the current volume level.
During the demonstration display, you can turn on or
off power illuminator by pressing ILLUMINATION.
Changing the spectrum
analyzer display
Adjusting the brightness
of the display
SPECTRUM 1
Y
SPECTRUM OFF
R
SPECTRUM 2
Y
SPECTRUM 3
R
T t
t
SPECTRUM 4
T
t
DIMMER OFF
y
DIMMER 1
T
t
DIMMER 2*
T
Changing the power
illuminator