Filter
Top Products
29
EN
Editing Recorded MDs
Editing Recorded MDs
Erasing all titles on a disc
(Name Erase Function)
Use this function to erase all titles on an MD
simultaneously.
1 Press EDIT/NO repeatedly while the deck is
stopped until “All Erase ?” appears in the display.
2 Press EDIT/NO again.
“Name Erase ?” appears in the display.
3 Press YES.
All titles are erased.
To cancel the Name Erase Function
Press p.
You can undo a name erasion
See “Undoing the Last Edit” on page 30.
You can erase all recorded tracks and titles
See “Erasing all tracks on an MD” on page 24.
Changing an existing title
1 Press EDIT/NO repeatedly until “Name in?”
appears in the display, then press YES and do the
following:
2 Keep pressing EDIT/NO until the current title is
erased.
3 Enter the new title.
Do Steps 3 to 6 of “Labeling Recordings” on page
28.
4 Press YES.
7 Press YES.
This completes the labeling procedure and the
title appears on the left side of the display.
To cancel labeling
Press p.
Note
You cannot label a track or an MD while you are recording
over an existing track.
To change Make sure that the deck is
A track title
Playing, pausing the track whose
title is to be changed, or stopped
after locating the track whose title is
to be changed
Stopped with no track number
appearing in the display
A disc name