Filter
Top Products
Recording on MDs
14
EN
Synchro-Recording a CD Z
You can easily dub CDs onto MDs using the CD
synchro buttons on the remote. Track numbers are
automatically marked as appear on the original
regardless of whether “LevelSync ON” or
“LevelSyncOFF” is selected.
You may have trouble operating both units if they are
far from each other. If you do, place the Mini System
close to this deck.
1 Set the function on the Mini System to CD.
2 Do Steps 2 to 5 in “Recording on an MD” on page
6 to prepare the deck for recording.
3 Insert a CD.
4 Select the playback mode (Shuffle Play, Program
Play, etc.) on the Mini System.
5 Press CD-MD SYNC STANDBY.
The CD pauses for playing and the deck pauses
for recording.
6 Press CD-MD SYNC START.
The deck starts recording and the CD starts
playback.
The track number and elapsed recording time of
the track appear in the display.
7 Press CD-MD SYNC STOP to stop synchro-
recording.
To pause recording
Press CD-MD SYNC STANDBY.
To restart recording, press CD-MD SYNC START.
A new track number is marked each time you pause
recording.
You can use the remote of the Mini System during
synchro-recording
When you press CD p, the CD stops and the deck
pauses for recording.
When you press CD P, the CD pauses and the deck
pauses for recording.
To restart synchro-recording, press CD ·.
You can check the remaining recordable time on the
MD
Press DISPLAY (see page 17).
)0P
+
=
p
·
·ª
·ª
◊
·
)0P
+
=
p
√
CD-MD SYNC
STOP
CD P
CD-MD SYNC
START
CD-MD SYNC
STANDBY