Filter
Top Products
19
EN
Playing MDs
Locating a Particular Point in a
Track
You can also use 0 and ) to locate a particular
point in a track during playback or playback pause.
To locate a point Press
While monitoring the
sound
) (forward) or 0 (backward)
and keep pressing until you find
the point.
Quickly by observing
the display during
playback pause
) or 0 and keep pressing
until you find the point. There is
no sound output during this
operation.
Notes
• If the disc reaches the end while you are pressing )
during playback pause, “OVER” appears in the display.
Press 0 (or MD =) or turn AMS counterclockwise to
go back.
• If the disc reaches the end while you are pressing )
during sound monitoring, the deck stops.
• Tracks that are only a few seconds long may be too short
to scan using the search function. For such tracks, it is
better to play the MD at normal speed.
•
•
•
•
•
•
•
•
•
•
•
p
·∏
•
•
•
•
•
•
•
r
)
0
§
=
+
0/)
To pause playing at the beginning of a track
Turn AMS (or press MD = or MD +) after pausing
playback.
To go quickly to the beginning of the last track
Turn AMS counterclockwise (or press MD =) while
the display shows the total track number and total disc
playing time, remaining recordable time of the disc, or
disc name (see page 17).