Filter
Top Products
21
EN
Playing MDs
Add tracks to the end of
the program
Change the whole program
completely
Do the following:
Do Steps 2 and 3 in “Creating
Your Own Program.”
1 Press p while the deck is
stopped.
2 Do Steps 2 and 3 in
“Creating Your Own
Program.”
To
To cancel Program Play
Press PLAY MODE repeatedly until “PROGRAM”
disappears when the deck is stopped.
You can program the same track repeatedly
While the track number appears in the display, press
AMS as many times as you want.
The program remains even after Program Play ends
When you press fl, you can play the same program
again.
Notes
• The program created by the Program Play Function is lost
when you turn off the deck or disconnect the AC power
cord. The program is, however, recalled during timer
playback.
• The display shows “- -m - -s” instead of the total playing
time when the total playing time of the program exceeds
160 minutes.
Checking the track order
You can check the order of tracks in your program
during playback or playback pause.
Turn AMS (or press MD = or MD +) during
playback or playback pause. The track numbers
appear in the order they were programmed.
Changing the track order
You can change the order of the tracks in your program
before you start playing.
Creating Your Own Program
(Program Play)
You can specify the playback order of the tracks on an
MD and create your own programs containing up to 25
tracks.
1 Press PLAY MODE repeatedly until “PROGRAM”
appears in the display when the deck is stopped.
2 Turn AMS until the track number you want
appears in the display.
3 Press AMS or PLAY MODE.
4 Repeat Step 2~3 to enter other tracks. Each time
you enter a track, the total program time is added
up and appears in the display.
5 Press fl to start Program Play.
•
•
•
•
•
•
•
•
•
•
•
p
·∏
•
•
•
•
•
•
•
r
)
0
§
=
+
PLAY MODE
·∏
= AMS +
p