Filter
Top Products
6
SECTION 1
SERVICING NOTE
Tray (CDM)
Move the Cam block in the direction
of arrow with a finger.
4
Panel board
2
Nut
1
Knob (VOL)
5
Ring (VOL)
(Remove the two claws from the Front panel back side.)
6
Filter (FL)
3
Six screws
(BVTP 3x10)
7
Indication plate (FL)
CD mechanism deck
Optical pick-up block
Floating screw
Clean the lens block
with applicator.
Note 1: “R”
As this unit has only a few buttons, some operations require the use of remote commander (provided with RM-SJ373/unit: 1-418-554-11)
buttons. These operations are indicated as “R” in this manual.
Example: MENU/NO “R” ...Press the MENU/NO button of the remote commander.
DRAWING OUT THE TRAY DURING POWER OFF
REMOVING THE INDICATION PLATE (FL)
Note: Follow the disassembly procedure in the numerical order given.
• Press the of the front panel from the rear and remove the 7
indication plate (FL).
CLEANING THE OPTICAL PICKUP (CD PLAYER)