Filter
Top Products
Troubleshooting
59
GB
If the system still does not
operate properly after performing
the above measures, reset the
system as follows:
1 Disconnect the mains lead.
2 Reconnect the mains lead.
3 Press ?/1 to turn on the system.
4 Press SPEAKER OUT MODE and SOUND
FIELD + on the unit and move SA-CD/DVD
lever on the unit to x at the same time.
The system is reset to the factory settings except
for DVD settings. You should set the settings
you made, such as the preset stations, clock, and
timer.
To return the DVD setup to the
default settings*, perform reset
as follows:
1 Press DVD SETUP in stop mode.
2 Press v or V repeatedly to select “RESET”,
then press ENTER.
3 Press v or V repeatedly to select “YES”,
then press ENTER.
It takes a few seconds to complete. Do not
press ?/1 when resetting the system.
* Except for Parental Control settings
One of the following messages may appear or
flash in the display during operation.
DVD/VIDEO CD/CD/Super Audio
CD/MP3/JPEG
Cannot Play
• A disc that cannot be played was inserted
(page 5).
• A disc with an unsupported Region code was
inserted.
Data Error
The JPEG file is an unsupported format.
DVD No Disc
There is no disc in the player.
Eject
The DVD player is ejecting the disc.
No Disc
There is no disc in the player.
Not in Use
You pressed an invalid button.
PASSWORD
Custom Parental Control or Parental Control is set.
Play Limit
The MP3 file cannot be played.
Please Wait
The function is switching to the DVD.
Push STOP!
You pressed PLAY MODE during play.
Reading
The system is reading TOC information of the disc.
Some buttons are not available.
RESUME
You stopped play with Resume Play activated
(page 15).
Step Full!
You tried to program 26 or more tracks (steps).
Messages
continued