Sony CMT-SE5 Stereo System User Manual


 
52
GB
Notes
When playing a VIDEO CD, Super Audio CD or
MP3 audio tracks, you cannot output digital audio.
You can record digital audio from this system only
when DVD function is selected.
E VIDEO/SAT IN jacks
Use the audio/video cords (not supplied) to
connect an optional analog component (VCR,
etc.) to these jacks. You can then listen to from
the component through this system.
F VIDEO/SAT DIGITAL IN
OPTICAL jack
Use a digital optical cable (square, not supplied)
to connect an optional digital component
(satellite tuner, etc.) to this jack. You can then
listen to from the component through this
system.
Listening to a digital
component
1 Connect an optical cable.
See “Hooking up optional components” on
page 51.
2 Press FUNCTION repeatedly until “MD”
appears.
Start playing the connected component.
Listening to a digital
component (such as a
satellite tuner)
1 Connect an optical cable.
See “Hooking up optional components” on
page 51.
2 Press FUNCTION repeatedly until
“VIDEO” appears.
3 Press MENU/NO repeatedly until
“SAT?” appears, then press ENTER.
Start playing the connected component.
Listening to an analog
component
1 Connect the audio cords.
See “Hooking up optional components” on
page 51.
2 Press FUNCTION repeatedly until “MD”
appears.
3 Press MENU/NO repeatedly until
“TAPE?” appears, then press ENTER.
Start playing the connected component.
Listening to audio from a
connected component