Filter
Top Products
DVD – Various functions
35
GB
x SIZE
When you move the surround speakers, set the
parameters for SURROUND. When you do not
connect center and surround speakers, press
SPEAKER OUT MODE repeatedly to select
“2CH” or “2.1CH” in step 5. The front, center
speakers and subwoofer setting is fixed, you
cannot change them.
The default settings are underlined.
Notes
• When adjusting speakers, the sound may cut off for a
moment.
• Depending on the settings of other speakers, the
subwoofer may output excessive sound.
Specifying the surround speaker
position and height
When setting the surround speakers, refer to the
diagram and select “SURROUND”.
The default setting is underlined.
x DISTANCE
The default distance setting for the speakers in
relation to the listening position is shown below.
FRONT YES
CENTER YES
SURROUND BEHIND (LOW), BEHIND
(HIGH), SIDE (LOW), SIDE
(HIGH): Specify the position and
height to implement the Digital
Cinema Surround modes.
SUBWOOFER YES
BEHIND (LOW) Select this if the surround
speakers are located in section
B and D.
BEHIND (HIGH) Select this if the surround
speakers are located in section
B and C.
SIDE (LOW) Select this if the surround
speakers are located in section
A and D.
SIDE (HIGH) Select this if the surround
speakers are located in section
A and C.
Position diagram
Height diagram
3m 3m
3m
3m 3m
continued