Filter
Top Products
34
GB
To enhance your system, you can connect optional components. Refer to the operating instructions
provided with each component.
A DIGITAL OUT (OPTICAL) jack
Use a digital optical cord (square, not supplied)
to connect an amplifier, MD deck or DAT deck
with a digital optical input jack. Sound is then
output when the system function is set to DVD.
By connecting this system to the optical input
jack of the optional amplifier equipped with
Dolby Digital or DTS decoder, you can enjoy
the 5.1 channel sound.
In addition, when the CD or DVD audio is linear
PCM, you can make a digital recording from this
system to an MD deck or DAT deck.
B COMPONENT VIDEO OUT
jacks
Use an optional video cord to connect a TV. If
your TV accept progressive format file signals,
you must use this connection and set the
progressive setting to “P-SCAN” (page 23).
C S VIDEO OUT jack
Use an S video cord (not supplied) to connect an
optional TV to this jack. You can enjoy higher
quality video images.
D VIDEO OUT jack
Use a video cord (supplied) to connect the video
input of TV to this jack.
Hooking up optional components
Amplifier or MD deck
To the digital input jack
of the digital component
To the component
video input jack of the
TV or projector
TV or projector
TV
To the S video
input jack of the TV
To the video input jack
of the TV
TV