Filter
Top Products
Tuner/Tape – Play
29
GB
Listening to non-preset radio
station
— Manual Tuning
1 Press TUNER/BAND repeatedly to
select “FM” or “AM.”
2 Press TUNING + or – repeatedly to tune
in the desired station.
To cut the sound
Press MUTING.
Press MUTING again or VOLUME + to restore
sound.
To listen to an FM stereo program
without stereo effect
When an FM stereo program has static noise,
press FM MODE repeatedly until “MONO”
appears. There will be no stereo effect, but the
reception will improve.
Tips
• To improve broadcast reception, adjust the supplied
antennas, or connect a commercially available
external antenna.
• You can record the radio programs on a tape
(page 30).
1 Open the cover in the lower part of the
unit.
2 Press xZ on the unit.
3 Load a recorded/recordable tape into
the cassette holder.
You can use TYPE I (normal) tape.
1 Load a tape.
2 Press TAPE (or FUNCTION + or –
repeatedly) to switch the function to
TAPE.
3 Press N on the unit.
Playback starts.
Other operations
Tape – Play
Loading a tape
Playing a tape
To Do this
Stop play Press xZ on the unit.
Pause Press X on the unit. Press the
button again to resume play.
Fast-forward or
rewind
Press m or M on the unit.
Cut the sound Press MUTING.
Press MUTING again or
VOLUME + to restore sound.
Remove a tape Press xZ on the unit in stop
mode.
With the side you
want to play/record
facing forward.