Filter
Top Products
51
Other Features
Timer recording
radio programs
To timer record, you must first preset the
radio station (see page 9) and set the clock
(see page 8).
The MD is automatically labeled with the
Station Name, the start time and the stop time
of the recording if the station is labeled (see
page 47).
1 Tune in the preset radio station (see
page 19).
2 Press CLOCK/TIMER SET.
3 Press +/– repeatedly until
“REC TIMER ?” appears.
4 Press ENTER/YES.
The hour indication flashes.
To change the setting
Do steps 1 to 5, then press CURSOR ? or /
until the time you want to change flashes.
To check the setting / To reactivate
the timer
Press CLOCK/TIMER SELECT repeatedly
until “DAILY TIMER” appears. The start
time, followed by the stop time, and the
sound source appears, then the original
display appears.
To cancel the timer
Press CLOCK/TIMER SELECT repeatedly
until “TIMER OFF” appears.
Notes
• You cannot activate wake up timer and recording
timer at the same time.
• Do not operate the system from the time the
power turns on until the playback starts (about 20
seconds).
• If the power turns on before the preset time,
playback starts with your selected music source at
the preset time.
• If you use another component, you must set the
timer on both systems to the same time.
=+
(Pp
1 / u
–+
–+
–
+
=+
(Pp
2
4,5,6,7
3,5,6
9
CLOCK/
TIMER
SELECT
continued