Filter
Top Products
49
Other Features
Using the Radio
Data System (RDS)
(European model only)
You can set the system to turn off after a
certain time, so that you can fall asleep to
music. You can set the timer in 10 minutes
increments.
What is the Radio Data
System?
Radio Data System (RDS)* is a broadcasting
service that allows radio stations to send
additional information along with the regular
program signal.
Note
RDS may not work properly if the station you are
tuned to is not transmitting the RDS signal properly
or if the signal is weak.
* Not all FM stations provide RDS service, nor do
they all provide the same types of services. If you
are not familiar with the RDS system, check with
your local radio stations for details on RDS
services in your area.
Receiving RDS
broadcasts
Simply select a station from the FM
band.
When you tune in a station that provides RDS
services, the station name appears in the
display.
=+
(Pp
1 / u
–+
–+
–
+
=+
(Pp
SLEEP
Press SLEEP repeatedly to select a
desired time.
Each time you press the button, the minute
display (the time after which the system turns
off) changes as follows:
90min n 80min n 70min
...
10min n
SLEEP OFF
To check the remaining time
Press SLEEP once.
To change the turn off time
Select the time you want by pressing SLEEP.
To cancel the Sleep Timer function
Press SLEEP repeatedly until “SLEEP OFF”
appears.
Tip
You can use the Sleep Timer, even when you have
not set the clock.
Falling asleep to
music
— Sleep Timer
To check the RDS information
Each time you press DISPLAY, the display
changes as follows:
Station name
Frequency
˜