Filter
Top Products
15
Basic Operations
Recording a CD on
an MD
— CD-MD Synchro Recording
With the
label side up
and the
shutter slide
rightward
With the
arrow
pointing
toward the
system
Tips
• You can start playing from the desired track in
step 3.
1 Press CD/MD
=0 or )+ repeatedly
until you find the desired track.
2 Press CD ^.
• Pressing CD ^ (or CD ( on the remote) when
the power is off automatically turns the power on
and starts CD play if there is a CD on the disc tray
(One Touch Play).
• You can switch from another source to the CD
player and start playing a CD by pressing CD ^
(or CD ( on the remote) (Automatic Source
Selection).
• If there is no CD on the disc tray, “CD NO DISC”
appears in the display.
Notes
• Do not use a CD with tape, seal or paste, on it as
this may damage of the system.
• Do not push the disc door closed, as this may
damage the system. Press CD 6 (or OPEN/
CLOSE CD on the remote) to close the disc door.
You can make a digital recording of a CD on
an MD, marking track numbers in the same
sequence as the original CD. If you use a
recorded MD, the system automatically
locates the end of the recorded portion and
starts the new recording from there. You can
also record a program of favorite tracks (see
page 31).
To turn on the system, press 1/u.
(P
1/u
= 0
–
p
) +
+
(P p
6
g
+
–
6
54
MD 6
1/u 2,3
MD p
MD indicator
continued
1 Insert a recordable MD.