Sony CAV-M1000ES Stereo Receiver User Manual


 
9
US
Getting Started
w; ZONE connection jacks
a) KEYPAD (page 18)
An RJ-45 jack for the Keypad interface. Each connector
interfaces with the following: power, GND, and data
input/output.
b) VIDEO OUT (page 18)
An RCA jack that sends a source video signal selected
by the zone to the composite video input on a zone
display.
c) FIXED PRE OUT (zones 1 to 4)
An RCA jack for connecting zone audio output to an
external amplifier. For use with applications where
either more power is required for a zone. Use an RCA
audio cable that is no longer than 2 m.
d) VARIABLE PRE OUT (zones 5 and 6)
An RCA jack for connecting zone audio output to an
external power amplifier. The volume is attenuated via
VOLUME +/ on the Keypad. Use an RCA audio
cable that is no longer than 2 m.
RF Remote Control
1 MUTING
Press to mute the audio.
2 VOLUME +/
Press to adjust the volume.
3 SYSTEM OFF
Press to shut down the system.
CHANNEL
SYSTEM OFF
VOLUME
MUTING
3
4
1
6
52
4 Cursor/ENTER
Press to control the source.
5 CHANNEL +/
Press to control the source.
6 RS232C connector
Hook up a computer using the dedicated RS232C
cable.
e) SPEAKERS (page 18)
A plug-in 4-terminal screw-type jack which accepts
speaker cords sizes up to 12AWG.
Leave the AC power cord unplugged when you hook
up speaker cords.
wa RS232C (page 17)
Hook up to other RS232C components, allowing the
Main Unit to be controlled by other RS232C
components, or to control other components that
communicate via RS232C, such as a Sony DVD Mega
Changer (ex. DVP-CX777ES) or a Sony A/V Receiver
(ex. STR-DA5000ES). Use an RS232C cross cable for
the connection.
ws AC IN (page 18)
Hooks up the supplied AC power cord to AC IN.