Filter
Top Products
39
US
Appendix
Using the RF Remote Control
Commands on the touch panel vary depending on the RF
Remote Control programming.
Turning the system on or off
1 Press SYSTEM OFF.
“ALL OFF”, “MAIN OFF”, and “RETURN” appear on
the touch panel.
2 Press “ALL OFF” when you want to turn off all
zones, and press “MAIN OFF” when you want to
turn off the main zone only.
Press “RETURN” when you want to cancel the
operation.
CHANNEL
SYSTEM OFF
VOLUME
MUTING
MUTING
SYSTEM OFF
Used for controlling
the source.
Used for controlling
the source.
Charging the internal battery
1 Attach the supplied ferrite core to the AC power
cord of the charger cradle, then wrap the AC
power cord twice around the ferrite core.
2 Connect the AC power cord of the charger cradle to
the wall outlet.
3 Place the RF Remote Control on the charger cradle.
The internal battery starts charging. It takes
approximately 16 hours for full charging. Charge for
considerable time when you use it for the first time.
Turning the RF Remote Control off
Leave the RF Remote Control alone for a few
minutes.
The RF Remote Control turns off automatically.
Adjusting the volume
Press VOLUME +/– to the desired volume level.
Muting the volume
Press MUTING.
To cancel the muting, press MUTING again.
VOLUME +/–
Meaning of icons shown on the top of the
display window
Icon Meaning
Communication between the RF Remote Control and
the Main Unit is completed.
Communication between the RF Remote Control and
the Main Unit has been interfered with. Or the distance
from the RF Remote Control to the RF Antenna is way
too far.
c Place the RF Antenna closer to the RF Remote
Control.
c Avoid interference of metal objects such as a cabinet
between the RF Antenna and the RF Remote Control.
Other radio waves have been interfering.
c Move the RF Remote Control about 1 inch to the left
to the right or up or down. Doing so may solve the
problem.
Some kind of trouble has occurred.
Contact your nearest Sony dealer.
The internal battery is being charged on the charger
cradle.
The remaining power of the battery is low.
c Charge the battery by placing the RF Remote Control
on the charger cradle.
To the wall outlet
12
3