Filter
Top Products
14
US
Getting Started
Before Customizing the System
Planning the system
Before setting up the system, plan the system
configuration.
1 Decide the source components to be connected to
each SOURCE connection of the Main Unit.
2 Decide the allocation of the components to be
used in each zone.
Be sure to read the following procedure thoroughly before
you actually make any settings.
Overview
The following chart gives an overview of how to set up
the Main Unit system.
Setting up the Main Unit
- Install the Main Unit. (page 15)
- Connect components, such as source components and
output components, to the Main Unit. (page 17)
- Make other connections.
Setting up a Keypad
- Install the Keypad into a junction box. (page 26)
- Connect the Main Unit and the Keypad. (pages 17, 18)
Customizing the Main Unit
- Customize the Main Unit on your computer. (page 20)
- Customize the Main Unit. (page 21)
Testing the components (page 30)
Setting up the RF Remote Control
- Customize the RF Remote Control on your computer.
For detailed information on the RF Remote Control, please
consult your nearest Sony dealer.