Sony CAV-M1000ES Stereo Receiver User Manual


 
5
US
Getting Started
Main Unit
Zones: Up to six zones receive up to eight source
audio/video signals.
Preamp Outs: Four fixed outputs for zones 1 to 4,
and two variable outputs for zones 5 and 6.
Amplification: All six zones have built-in stereo
audio amplifiers at 30 Watts per channel.
Video outputs for all six zones.
Keypad connections: RJ45 connectors for all six zones
using CAT5 cables.
Sources: Up to eight audio/video sources can be
selected by all six zones.
Remote code entry: Remote code commands can be
learned by the Main Unit.
on your computer
on the Main Unit
12 V trigger: Six zone-specific 12 V status outputs; each
300 mA max, total 1.2 A.
RS232C port (Front): Allows you to connect the Main
Unit to your computer to update the settings or
firmware.
RS232C ports (Rear): Allow you to connect a Sony DVD
Mega Changer (ex. DVP-CX777ES) and a Sony A/V
Receiver (ex. STR-DA5000ES) to the Main Unit.
Keypad
LCD contrast adjustment.
Connecting IR IN to an IR emitter enables you to use
the IR Remote Control for the additional range.
RJ45 connectors enable you to use two Keypads in a
single zone.
RF Remote Control
LCD panel configurable through your computer.
Controls the audio/video sources in the main zone and
the other zones.
Customize touch panels via an RS232C cross cable
connected to your computer.