Filter
Top Products
1-73
DFS-700/700P
Appendixes
A-6
Appendixes
Effect control parameters (continued)
Pattern
No.
Effect type and adjustable parameters
1075
to
1079
Cropping
F1: X-coordinate of center (Pos_X = Left to right)
F2: Y-coordinate of center (Pos_Y = Bottom to top)
F3: Size of pattern (Size = 0 to 100)
F4: Aspect raito of the pattern (Aspect = Taller to wider)
Picture-in-picture (three-dimensional)
F1: X-axis rotation (Rot_X = –70° to +70°)
F2: Y-axis rotation (Rot_Y = –70° to +70°)
F3: Z-axis rotation (Rot_Z = –70° to +70°)
F4: Perspective (Pers = 0 to 100)
Picture-in-picture (skew)
F1: Expansion and reduction along X-axis (Size_X = Small to 3 times)
F2: Expansion and reduction along Y-axis (Size_Y = Small to 3 times)
F3: Degree of distortion along X-axis (Skew_X = Min: No distortion)
(default)
F4: Degree of distortion along Y-axis (Skew_Y = Min: No distortion)
(default)
Spotlight
F1: Spotlight brightness at maximum fader lever position (Shadow = Dark
to bright)
F4: Aspect ratio of the processing area (Aspect = Taller to wider)
1102
1103
1106
to
1109
1104
1105
1150
1151
1210
to
1213
Stream
F1: Stream direction (Dirctn)
Wave modulation
F1: Degree of modification 1 (Amp_X = 0 to 100) (1250: Modification
along X-axis)
F2: Degree of modification 2 (1250: Amp_Y = 0 to 100) (1251/1271:
Angle = 0 to 99)
1250: Modification along Y-axis
1251, 1271: Direction of modification
1252, 1253, 1270: Not used
F3: Wave cycle (Freq = 0 to 100)
F4: Wave speed (Speed = 0 to 100)
1250
to
1253
1270
1271
Effect Control Parameter List
1065 Strobe
F1: Frames displayed per second (Strobe = 0 to 100)
Cinema
F1: Frames displayed per second (Strobe = 0 to 100)
F2: Wide screen degree (Wide = 0 to 100)
F3: Wide screen position (Posi = Bottom to top)
F4: Softness (Soft = 0 to 100)
1120
to
1128
Picture-in-picture
F2: Display position (POS = TOP_L/TOP/TOP_R/LEFT/CENTER/RIGHT/
BTM_L/BOTTOM/BTM_R)
F3: Picture size (Size = 0 to 100)
F4: X-axis picture position (Pos_X = –100 to +100)
F5: Y-axis picture position (Pos_Y = –100 to +100)
1066
1067
(continued)
Appendixes
Appendixes
A-7
Effect control parameters (continued)
Pattern
No.
Effect type and adjustable parameters
1280
to
1283
1285
1286
1380
to
1383
1385
to
1388
1390
to
1394
1690
1750
to
1753
2150
to
2154
Real paint, Stained glass
Split slide
Split slide
F1 :Slide frequency (Freq = 0 to 100)
2D rotation + Compress + Slide (modified)
Split 3D rotation
Page turn
F1: Direction of turn (Angle = 0 to 99)
F2: Change in turn direction (Curve = –100 to +100)
2160
to
2167
Split page turn
2250
2251
F1: Number of split (Freq = 0 to 100)
Picture-in-picture (sphere)
F1: Degree of paint effect (Amp = 0 to 100)
F2: Frames per second (Strobe = 0 to 100)
F3: Softness (Soft = 0 to 100)
F4: Mask pattern (MASK = OFF/CIRCLE/RECT/CIRINV/RECINV)
F5: Aspect ratio of the mask area (MskAsp = Taller to wider)
F1: Amount of curving (Curve = 0 to 100)
F2: Curve direction (Angle = 0 to 99)
F3: Amount of spiral (Spiral = –100 to +100)
F4: Z-axis rotation (Rot_Z = –100 to +100)
F1: Number of split (Freq = 0 to 100)
F1: Degree of modification (Amp = 0 to 100)
F2: Z-axis rotation (Rot_Z = –100 to +100)
F3: X-axis mapping area (Area_X = 0 to 100)
F4: Y-axis mapping area (Area_Y = 0 to 100)
F1: Slide frequency (Freq = 0 to 100)
F2: Split frequency (Angle = 0 to 99)
F3: Z-axis rotation (Rot_Z = –100 to +100)
(continued)